SANDVIK COROMANT T-Max Q-Cut L151.20-08-20 – 1/2 x 1/2 Inch Left-Hand Parting & Grooving Shank Tool

The SANDVIK COROMANT T-Max Q-Cut L151.20-08-20 is a professional shank tool for parting and grooving, featuring a 1/2 x 1/2 inch rectangular shank interface and an explicitly supplied left-hand cutting direction (HAND L).

This exact configuration has a supplied 29.972 mm parting diameter (CUTDIA) and 15.0114 mm maximum cutting depth (CDX). Its shaft dimensions are specified as 12.7 mm width (B) and 12.7 mm height (H).

Additional supplied dimensions include 12,954 mm functional width (WF/W), 12.7 mm functional height (HF), 150,114 mm functional length (LF/L) and 16 mm maximum cantilever length (OHX).

The cutting-part interface is explicitly identified as Q-Cut – size 20 (N151.2-200-5E). The holder is configured without coolant, with CNSC 0 – without coolant and CXSC 0 – no coolant exit.

Important dimensional note: the source provides the functional width and functional length as 12,954 mm and 150,114 mm using comma notation. These values are preserved exactly as supplied and have not been silently converted or reinterpreted.

🔹 Key Features

• Manufacturer: SANDVIK COROMANT
• Product Family: T-Max Q-Cut
• Model: L151.20-08-20
• Manufacturer No.: L151.20-08-20
• Product Type: Shank Tool for Parting and Grooving
• Parting Diameter CUTDIA: 29.972 mm
• ADINTMS: Rectangular shank – inch: 1/2 x 1/2
• ADINTM: Rectangular shank – inch: 1/2 x 1/2
• Functional Width WF: 12,954 mm
• Functional Width W: 12,954 mm
• Functional Height HF: 12.7 mm
• Functional Length LF: 150,114 mm
• Functional Length L: 150,114 mm
• IC Code: 19160
• Coolant Outlet CXSC: 0 – no coolant exit
• Coolant Inlet CNSC: 0 – without coolant
• Life Cycle Status LCS: 20
• Maximum Cantilever Length OHX: 16 mm
• Shaft Width B: 12.7 mm
• Shaft Height H: 12.7 mm
• Cutting Direction HAND: L / Left-hand
• Maximum Cutting Depth CDX: 15.0114 mm
• CUTIN: Q-Cut – size 20 (N151.2-200-5E)
• Condition: New
• Year: 2025

🔧 Professional T-Max Q-Cut Parting & Grooving Tool

The L151.20-08-20 belongs to the SANDVIK COROMANT T-Max Q-Cut tooling family and is explicitly described as a shank tool for parting and grooving.

Its confirmed supplied configuration combines:

29.972 mm Parting Diameter

15.0114 mm Maximum Cutting Depth

1/2 x 1/2 Inch Rectangular Shank

16 mm Maximum Cantilever Length

Left-Hand Cutting Direction

Q-Cut Size 20 Interface

N151.2-200-5E

CNSC 0 – Without Coolant

✔ Professional parting and grooving tool

✔ Inch rectangular-shank configuration

✔ 1/2 x 1/2 inch machine-side interface

✔ Left-hand cutting direction

✔ Q-Cut size 20 interface

✔ 16 mm maximum cantilever length

✔ No-coolant configuration

✔ New condition

✔ Year 2025

💎 1/2 x 1/2 Inch Rectangular Shank Interface

The exact supplied machine-side interface is:

Rectangular shank – inch: 1/2 x 1/2

Confirmed:

• ADINTMS: Rectangular shank – inch: 1/2 x 1/2
• ADINTM: Rectangular shank – inch: 1/2 x 1/2
• Interface Type: Rectangular shank
• Version: Inch
• Shaft Width B: 12.7 mm
• Shaft Height H: 12.7 mm

The 1/2 x 1/2 inch interface is explicitly supplied and has not been inferred from the model designation.

✔ Inch rectangular shank

✔ 1/2 x 1/2 inch interface

✔ 12.7 mm shaft width

✔ 12.7 mm shaft height

✔ Exact supplied interface retained

⚙️ Parting & Grooving Geometry

The principal supplied cutting geometry includes:

Parting Diameter CUTDIA: 29.972 mm

Maximum Cutting Depth CDX: 15.0114 mm

Maximum Cantilever Length OHX: 16 mm

Confirmed:

• CUTDIA: 29.972 mm
• CDX: 15.0114 mm
• OHX: 16 mm
• HF: 12.7 mm
• B: 12.7 mm
• H: 12.7 mm
• HAND: L

The supplied 15.0114 mm CDX value is retained specifically as the maximum cutting depth, while 16 mm OHX is retained specifically as the maximum cantilever length.

Neither value has been reinterpreted as groove width, insert width or another dimensional parameter.

✔ 29.972 mm parting diameter

✔ 15.0114 mm maximum cutting depth

✔ 16 mm maximum cantilever length

✔ Left-hand cutting configuration

🔩 Q-Cut Size 20 Cutting-Part Interface

The supplied CUTIN information is:

Q-Cut – size 20 (N151.2-200-5E)

Confirmed:

• Cutting-Part Family: Q-Cut
• Interface Size: 20
• Interface Identifier: N151.2-200-5E
• Exact Insert Grade: Not supplied
• Exact Insert Geometry: Not supplied
• Insert Coating: Not supplied
• Chipbreaker: Not supplied
• Insert Material: Not supplied
• Insert Width: Not separately supplied

No additional dimensional or insert specification has been inferred from the characters contained within N151.2-200-5E.

📐 Functional Width, Height & Shaft Dimensions

The supplied dimensional specifications are:

Functional Width WF/W: 12,954 mm

Functional Height HF: 12.7 mm

Shaft Width B: 12.7 mm

Shaft Height H: 12.7 mm

Confirmed:

• WF: 12,954 mm
• W: 12,954 mm
• HF: 12.7 mm
• B: 12.7 mm
• H: 12.7 mm

The source explicitly supplies 12,954 mm for functional width. This notation is retained exactly rather than silently converting the comma to a decimal point.

The functional width has not been reinterpreted as groove width or insert width.

✔ 12,954 mm supplied functional width

✔ 12.7 mm functional height

✔ 12.7 mm shaft width

✔ 12.7 mm shaft height

📏 Functional Length & Maximum Cantilever Length

The supplied length specifications are:

Functional Length LF/L: 150,114 mm

Maximum Cantilever Length OHX: 16 mm

Confirmed:

• LF: 150,114 mm
• L: 150,114 mm
• OHX: 16 mm
• Overall Length: Not separately supplied
• Projection Length: Not separately supplied

The 16 mm maximum cantilever length is supplied without ambiguous comma notation and is preserved exactly.

The functional length 150,114 mm is also preserved exactly as supplied. Because the source uses comma notation for this value, its decimal interpretation should be confirmed when precise dimensional compatibility is required.

➡️ Left-Hand Cutting Direction

The supplied cutting-direction specification is:

HAND: L

Confirmed:

• HAND: L
• Cutting Direction: Left-hand

The left-hand configuration is explicitly supplied for this exact L151.20-08-20 tool and is therefore not inferred from the initial L in the model designation.

✔ HAND L

✔ Left-hand cutting

✔ Explicitly supplied specification

✔ Not inferred from model prefix

💧 Without Coolant – CNSC 0 / CXSC 0

The supplied coolant configuration is:

CNSC: 0 – without coolant

and

CXSC: 0 – no coolant exit

Confirmed:

• Coolant Inlet CNSC: 0
• CNSC Description: Without coolant
• Coolant Outlet CXSC: 0
• CXSC Description: No coolant exit
• Coolant Pressure: Not supplied
• Coolant Flow Rate: Not supplied

This exact holder should therefore not be described as having an internal-coolant or through-coolant configuration based on the supplied specifications.

✔ CNSC 0

✔ Without coolant

✔ CXSC 0

✔ No coolant exit

✔ Coolant pressure not invented

🛠 T-Max Q-Cut L151.20-08-20 Configuration

The exact supplied configuration can be summarized as:

SANDVIK COROMANT

T-Max Q-Cut

L151.20-08-20

Parting & Grooving Shank Tool

1/2 x 1/2 Inch Rectangular Shank

29.972 mm Parting Diameter

15.0114 mm Maximum Cutting Depth

12,954 mm Functional Width

12.7 mm Functional Height

150,114 mm Functional Length

16 mm Maximum Cantilever Length

12.7 x 12.7 mm Shaft

Left-Hand Cutting Direction

Q-Cut Size 20

N151.2-200-5E

IC Code 19160

CNSC 0 – Without Coolant

CXSC 0 – No Coolant Exit

🏭 Typical Applications

Based on the supplied product type and configuration, relevant professional application contexts include:

• CNC parting operations
• CNC grooving operations
• Lathe parting applications
• Lathe grooving applications
• Industrial turning
• Production machining
• CNC turning centers
• Industrial metalworking
• CNC machine shops
• Manufacturing plants
• Tool rooms
• T-Max Q-Cut tooling systems
• Q-Cut size 20 tooling setups
• Left-hand tooling configurations
• Inch rectangular-shank tool positions
• Professional machining environments
• Industrial cutting-tool applications

Specific compatible workpiece materials, insert grades, cutting speeds and feed parameters were not supplied.

📊 Technical Specifications

• Manufacturer: SANDVIK COROMANT
• Product Family: T-Max Q-Cut
• Model: L151.20-08-20
• Manufacturer No.: L151.20-08-20
• Product Description: T-Max Q-Cut shank tool for parting and grooving
• Parting Diameter CUTDIA: 29.972 mm
• ADINTMS: Rectangular shank – inch: 1/2 x 1/2
• ADINTM: Rectangular shank – inch: 1/2 x 1/2
• Functional Width WF: 12,954 mm
• Functional Width W: 12,954 mm
• Functional Height HF: 12.7 mm
• Functional Length LF: 150,114 mm
• Functional Length L: 150,114 mm
• IC Code: 19160
• Coolant Outlet CXSC: 0 – no coolant exit
• Coolant Inlet CNSC: 0 – without coolant
• Life Cycle Status LCS: 20
• Maximum Cantilever Length OHX: 16 mm
• Shaft Width B: 12.7 mm
• Shaft Height H: 12.7 mm
• Cutting Direction HAND: L / Left-hand
• Maximum Cutting Depth CDX: 15.0114 mm
• CUTIN: Q-Cut – size 20 (N151.2-200-5E)
• Exact Insert Grade: Not supplied
• Exact Insert Geometry: Not supplied
• Insert Coating: Not supplied
• Chipbreaker: Not supplied
• Insert Material: Not supplied
• Insert Width: Not separately supplied
• Groove Width: Not separately supplied
• Recommended Cutting Speed: Not supplied
• Feed Rate: Not supplied
• Coolant Pressure: Not supplied
• Body Material: Not supplied
• Tool Weight: Not supplied
• Specific Workpiece Materials: Not supplied
• Condition: New
• Year: 2025
• Stock Number: STK-SANDVIK-L151.20-08-20

The supplied dimensional values 12,954 mm and 150,114 mm have been preserved exactly as provided because the comma notation is potentially ambiguous. Exact dimensional interpretation, insert grade, insert geometry, recommended cutting speeds, feed rates and other material-specific machining parameters should be confirmed from current SANDVIK COROMANT technical documentation before use.

⭐ Why Choose the SANDVIK COROMANT T-Max Q-Cut L151.20-08-20?

The SANDVIK COROMANT T-Max Q-Cut L151.20-08-20 provides a clearly specified professional configuration for parting and grooving, combining a 1/2 x 1/2 inch rectangular shank, 29.972 mm parting diameter, 15.0114 mm maximum cutting depth, 16 mm maximum cantilever length, and an explicitly supplied left-hand cutting direction.

Its shaft dimensions are 12.7 x 12.7 mm, while the cutting-part interface is explicitly identified as Q-Cut size 20 – N151.2-200-5E.

The coolant arrangement is also clearly defined: CNSC 0 – without coolant and CXSC 0 – no coolant exit.

✔ Advantages

✔ SANDVIK COROMANT manufacturer

✔ T-Max Q-Cut tooling family

✔ Model L151.20-08-20

✔ Professional parting and grooving shank tool

✔ 1/2 x 1/2 inch rectangular shank

✔ 12.7 mm shaft width

✔ 12.7 mm shaft height

✔ 29.972 mm parting diameter

✔ 15.0114 mm maximum cutting depth

✔ 16 mm maximum cantilever length

✔ 12,954 mm supplied functional width

✔ 12.7 mm functional height

✔ 150,114 mm supplied functional length

✔ Left-hand cutting direction

✔ HAND L explicitly supplied

✔ Q-Cut size 20 interface

✔ N151.2-200-5E identifier

✔ IC Code 19160

✔ CNSC 0 – without coolant

✔ CXSC 0 – no coolant exit

✔ LCS 20

✔ Insert grade not invented

✔ Insert geometry not invented

✔ Insert coating not invented

✔ Cutting speeds not estimated

✔ Feed rates not invented

✔ Workpiece compatibility not assumed

✔ New condition

✔ Year 2025